WT32-ETH01 LAN 8720 RJ45 wired Wireless-tag

Overview

WT32-ETH01 LAN 8720 RJ45 ESP32 wired Wireless-tag


Struggling to find some info / Arduino IDE examples for WT32-ETH01 Wireless-tag

if you know some examples / usefull info

share it ? https://github.com/ldijkman/WT32-ETH01-LAN-8720-RJ45-/discussions


MY FTDI programmer is not always succesfull with programming = i used board 'ESP32 Dev Module' settings

STRANGE another same FTDI programmer is doing better with programming https://www.google.com/search?q=FTDI+programmer

NOW using a ESP-01 / ESP8266-01 female 8pin/2row-4pin programmer with ch340 chip https://www.google.com/search?q=ESP-01+CH340G

program = wt32-eth01 powerup with gpio0 pull to ground (better with 10k resistor?)

run / monitor == wt32-eth01 powerup = gpio0 NO connection to ground


programming mode = better put a resistor in IO0 to ground?

programming mode = better put a resistor in IO0 to ground?

If someone programs gpio0 as output and high when connected to ground blows the gpio0 pin?


program WT32-ETH01 with ESP-01 / ESP8266-01 programmer https://www.google.com/search?q=esp8266-01+programmer+ch340G

  • red 3.3 Volt
  • purple ground
  • white TX0
  • grey RX0
  • Connect programmer Gpio0 to WT32-ETH01 Gpio0
  • powerup with switch to PROG program == programming mode
  • powerup with switch to UART monitor == run / monitor mode

program WT32-ETH01 with ESP-01 / ESP8266-01 programmer https://www.google.com/search?q=esp8266-01+programmer+ch340G

  • lefttop---------3.3 Volt
  • leftbottom-----RX0
  • righttop-------TX0
  • rightbottom-----ground
  • Connect programmer Gpio0 to WT32-ETH01 Gpio0
  • powerup with switch to PROG program == programming mode
  • powerup with switch to UART monitor == run / monitor mode


poor documentation, why no mention of what is analog pins in pinout

chip used wt32-s1 http://www.wireless-tag.com/portfolio/wt32-s1/

more i/o info wt32-s1 https://github.com/ldijkman/WT32-ETH01-LAN-8720-RJ45-/blob/main/WT32-S1-DataSheet-V1.1.pdf

schematic https://github.com/ldijkman/WT32-ETH01-LAN-8720-RJ45-/blob/main/WT32_ETH01_V2.schematic.pdf


Arduino IDE WT32-ETH01 ino files on this github


things to try

test a rotary encoder, maybe use the 3 input only pins? (or maybe make a nano i2c rotary encoder)


Install the ESP32 Board in Arduino IDE in less than 1 minute (Win, Mac, Linux)


Less Wires => power over ethernet cable is not included on WT32-ETH01, but you can D.I.Y.

  • Do It YourSelf

10 Euro PoE power over ethernet injector https://www.google.com/search?q=PoE+injector

3 Euro PoE power over ethernet splitter 5v https://www.google.com/search?q=PoE+splitter+5v


replace the arduino mega with ethernetshield http://arduino.tk:8888/HC.htm?file=27-3-21.CSV

the mega2560 with uno/mega ethernetshield W5100 did not work with cheap longer ethernet cables

the WT32-ETH01 works with cheap longer ethernet cables


A Penny for Sharing My Thoughts?

www.paypal.me/LDijkman

Issues
  • Schematic / Pinout mismatch for IO35 / IO5 and RXD2

    Schematic / Pinout mismatch for IO35 / IO5 and RXD2

    Q: Which is the correct ESP32 IO that has a pad between IO4 and IO12?

    The schematic shows IO35 is used for RXD2, and that IO5 is brought out to J9/J11 (other side's header pads). The programming example also shows this pinout. Thus, exposed pins in order would include IO2, IO4, IO5, IO12, ...

    However, the pinout diagram indicates that the exposed pins are IO2, IO4, IO35, IO12, ... This matches the silkscreen on v1.2 devices.

    Thank you!

    opened by henrygab 0
Owner
Dirk Luberth Dijkman
Very Boring Person
Dirk Luberth Dijkman
Anchor/Tag Configuration using Decawave DWM1000 UWB radios | Indoor Localization

Features This project implements the following features: Precise distance and location measurements using DWM1001 UWB radios. Nodes can be easily conf

Jonathan Pereira 22 Jun 9, 2022
Controle de acesso com Arduino via leitura de Tag RFID.

arduino-access-control PT-BR Controle de acesso com Arduino via leitura de Tag RFID. Esta versão possui um menu CLI escondido que é mostrado quando o

Marco Barbosa 1 Oct 27, 2021
Wireless remote controller for Klipper 3D printers

StacKlipper Wireless remote controller for Klipper 3D printers Description StacKlipper is a remote controller for Klipper (Moonraker installed) 3D pri

null 16 Apr 4, 2022
Code for our ECE445/ME470 design: Wireless Charging Table with Automatic Alignment

Qi Wireless Charging Table with Automatic Alignment Code for ECE445/ME470 Senior Design Project SP21 at ZJUI. Team 24: Kaiwen Cao, Tianyi Han, Tingkai

Zikai Liu 2 May 1, 2022
Bluetooth Joystick : A wireless joystick with ESP-32 microcontroller and Dual Axis Joystick Module using the Bluetooth connectivity.

BluetoothJoystick Bluetooth Joystick : A wireless joystick with ESP-32 microcontroller and Dual Axis Joystick Module using the Bluetooth connectivity.

null 9 Feb 24, 2022
Design files and resources for building a wireless N64 controller

wireless-n64-controller This project and its documentation is a Work-In-Progress. I'm still working on writing everything down and working out kinks i

Spencer Fraint 32 Jun 18, 2022
My new zigbee project. Wireless temperature and humidity mini sensor with electronic ink display 2.13 inches, low power consumption, compact size, enclosure with magnets.

My new zigbee project. Wireless temperature and humidity mini sensor with electronic ink display 2.13 inches, low power consumption, compact size, enclosure with magnets. The device use SHTC3 sensors, chip CC2530, battery CR2477.

Andrew Lamchenko 13 Feb 22, 2022
A wireless control for an RGB LED based on emotions found in discord messages.

Sample project (See the README.md file in the upper level 'examples' directory for more information about examples.) This is the simplest buildable ex

Fernando Mendoza 2 Dec 1, 2021
gr-nrf24-sniffer is a tool to receive and decode wireless traffic from nRF24L01(+) modules

gr-nrf24-sniffer What is this? gr-nrf24-sniffer is a tool to receive and decode wireless traffic from nRF24L01(+) modules (or older nRF24xxx) using GN

null 5 Jun 22, 2022
Wgeo, or "wi-fi geolocator", is a cross-platform C/C++ library for wifi-based device geolocation, utilising public wireless access point location databases

wgeo Wgeo, or "wi-fi geolocator", is a cross-platform C/C++ library for wifi-based device geolocation, utilising public wireless access point location

Xavier Maruff 2 Jan 30, 2022
Arduino code for a high speed 8000hz wired mouse using a teensy 4 MCU

teensy4_mouse Arduino code for a high speed 8000Hz wired mouse using a teensy 4 MCU. This code is inspired by https://github.com/mrjohnk/PMW3360DM-T2Q

Herbert Trip 7 Mar 11, 2022
LAN Party VPN - Run VPN on top of Discord. No installation required.

LAN Party VPN - VPN for Virtual LAN Parties Have you ever wanted to play a classic game with your friends but not able to because you or your friends

Yifan Gu 237 Jun 20, 2022
ZigStar LAN Gateway - Firmware

ZigStar LAN Gateway - Firmware This firmware delevoped to use with ZigStar LAN Gateway Functions Zigbee UART port forwarding using socket LAN connecti

null 28 Jun 13, 2022
A software for sharing in LAN

iptux: LAN communication software Table of Contents generated with DocToc Install Linux Mac OS X Build from source Linux (Debian and Ubuntu) Mac OS X

iptux 374 Jun 28, 2022
Convenient unified display of the most relevant technical and tag data for video and audio files.

MediaInfoLib README MediaInfo(Lib) is a convenient unified display of the most relevant technical and tag data for video and audio files. MediaInfoLib

MediaArea 445 Jun 28, 2022
Anchor/Tag Configuration using Decawave DWM1000 UWB radios | Indoor Localization

Features This project implements the following features: Precise distance and location measurements using DWM1001 UWB radios. Nodes can be easily conf

Jonathan Pereira 22 Jun 9, 2022
Mixed reality VR laser tag using Oculus Quest 2 and OAK-D depth cameras. First prize winner for North America region in OpenCV AI Competition 2021.

Mixed Reality Laser Tag Copyright 2021 Bart Trzynadlowski Overview This is the source code to my Mixed Reality Laser Tag project, which won first priz

null 34 Jun 3, 2022
Controle de acesso com Arduino via leitura de Tag RFID.

arduino-access-control PT-BR Controle de acesso com Arduino via leitura de Tag RFID. Esta versão possui um menu CLI escondido que é mostrado quando o

Marco Barbosa 1 Oct 27, 2021
About A TreeSitter parser for Neorg's `table` Tag

NFF Table-Tag TreeSitter Parser A TreeSitter grammar for Neorg's table format. Available Commands Command Result yarn installs needed dependencies (on

Neorg 7 Feb 12, 2022
A TreeSitter parser for Neorg's `document.metadata` Tag

NFF Metadata TreeSitter Parser A TreeSitter grammar for Neorg's document.meta format. Available Commands Command Result yarn installs needed dependenc

Neorg 9 Mar 5, 2022
Wireless remote controller for Klipper 3D printers

StacKlipper Wireless remote controller for Klipper 3D printers Description StacKlipper is a remote controller for Klipper (Moonraker installed) 3D pri

null 16 Apr 4, 2022
ESP32/8266 Arduino/PlatformIO library that painlessly enables incredibly fast re-connect to the previous wireless network after deep sleep.

WiFiQuick ESP32/8266 Platformio/Arduino library that painlessly enables incredibly fast re-connect to the previous wireless network after deep sleep.

Winford 1 Apr 3, 2022
Code for our ECE445/ME470 design: Wireless Charging Table with Automatic Alignment

Qi Wireless Charging Table with Automatic Alignment Code for ECE445/ME470 Senior Design Project SP21 at ZJUI. Team 24: Kaiwen Cao, Tianyi Han, Tingkai

Zikai Liu 2 May 1, 2022
Bluetooth Joystick : A wireless joystick with ESP-32 microcontroller and Dual Axis Joystick Module using the Bluetooth connectivity.

BluetoothJoystick Bluetooth Joystick : A wireless joystick with ESP-32 microcontroller and Dual Axis Joystick Module using the Bluetooth connectivity.

null 9 Feb 24, 2022
"Wireless Made Easy!" - Microchip MRF MiWi package is MiWi P2P and Star Stacks for MRF24J40 and MRF89XA transceivers running on MPLAB X IDE

MRF-MiWi "Wireless Made Easy!" - Microchip MiWi P2P and Star Stack Opened for MRF24J40 and MRF89XA transceiver running on MPLAB X IDE Devices: | MRF24

Microchip Technology 2 Dec 28, 2021
It is a wireless temperature, pressure and humidity sensor, supports working in Zigbee networks.

It is a wireless temperature, pressure and humidity sensor, supports working in Zigbee networks. (Zigbee2mqtt open source project). Built on CC2530 chip (Zigbee), two modications: Ebyte E18-MS1PA2-PCB radio module with amplifier and Ebyte E18-MS1-PCB. Powered by the most common AAA batteries.

Andrew Lamchenko 23 Jun 10, 2022
Wireless keystroke injection attack platform

Wireless keystroke injection attack platform

Spacehuhn Technologies 1.3k Jun 24, 2022
Design files and resources for building a wireless N64 controller

wireless-n64-controller This project and its documentation is a Work-In-Progress. I'm still working on writing everything down and working out kinks i

Spencer Fraint 32 Jun 18, 2022
My new zigbee project. Wireless temperature and humidity mini sensor with electronic ink display 2.13 inches, low power consumption, compact size, enclosure with magnets.

My new zigbee project. Wireless temperature and humidity mini sensor with electronic ink display 2.13 inches, low power consumption, compact size, enclosure with magnets. The device use SHTC3 sensors, chip CC2530, battery CR2477.

Andrew Lamchenko 13 Feb 22, 2022