DIY Zigbee CC2530 Motion sensor (AM312/ AM412/ BS312/ BS412), Temperature /Humidity /Pressure sensor (BME280), Ambient Light sensor (BH1750), 2.9/2.13/1.54 inch e-Paper Module

Overview

How to join:

If device in FN(factory new) state:

  1. Press and hold button (1) for 2-3 seconds, until device start flashing led
  2. Wait, in case of successfull join, device will flash led 5 times
  3. If join failed, device will flash led 3 times

If device in a network:

  1. Hold button (1) for 10 seconds, this will reset device to FN(factory new) status
  2. Go to step 1 for FN device

Hardware

You might also like...
Driver for the TI TMP102 I2C temperature sensor. For use with TI TM4C123X MCUs.

TI TMP102 Driver Simple driver for the TI TMP102 I2C temperature sensor. For use with TI TM4C123X MCUs and TI's TivaWare™ Peripheral Driver Library. D

LM75A temperature sensor library that you can use with STM32F10x series microcontrollers.

STM32F10x-LM75A-Library LM75A temperature sensor library that you can use with STM32F10x series microcontrollers. Launching the LM75A sensor in your a

 VR15: a VR FPS game controller that generates haptic feedback with high-pressure air.
VR15: a VR FPS game controller that generates haptic feedback with high-pressure air.

VR15: a VR FPS game controller that generates haptic feedback with high-pressure air.

multispectral monitoring of a sourdough starter; esp32 eink module, scd30 co2 sensor, vl6180 distance sensor

EINK STARTER MONITOR See full blogpost here Tracks height of starter with a VL6180 i2c distance sensor, and CO2/temperature/humidity with an SCD30. A

Collection of Arduino sketches for TDK's combo accel/gyro motion sensor
Collection of Arduino sketches for TDK's combo accel/gyro motion sensor

ICM42688 Collection of Arduino sketches for TDK's combo accel/gyro motion sensor The basic sketch configures the sensors' data rates and full scale se

Téléinformation Linky autoalimenté ZigBee 3.0
Téléinformation Linky autoalimenté ZigBee 3.0

ZLinky_TIC Téléinformation Linky autoalimenté communiquant en ZigBee 3.0 Description PCB ZLinky_TIC est un appareil permettant de transmettre toutes l

Veml7700-esp-idf - VEML7700 Light Sensor driver for ESP-IDF
Veml7700-esp-idf - VEML7700 Light Sensor driver for ESP-IDF

VEML7700 Light Sensor driver for ESP-IDF Overview This project aims to provide a very simple interface for configuring and reading data from the VEML7

Import of the DIY Dynamic Template v2, retrieved from the Internet Archive
Import of the DIY Dynamic Template v2, retrieved from the Internet Archive

Dynamic Templates This is a copy of the D*I*Y Planner Dynamic Template application that was posted to diyplanner.com/node/6210 back in 2009,

ESP32 based DIY word clock project
ESP32 based DIY word clock project

Wordclock ESP32 based DIY wordclock project TL;DR: check out this ✨ demo video ✨ Another take on the classic DIY word clock. This one requires a laser

Comments
  • Allocation of image buffer

    Allocation of image buffer

    .. just a remark.. I noticed in your code you allocate image buffer in display drivers e.g. epd2in9.c this way:

    unsigned char image[672]; PaintPaint(image, 0, 0);

    inside init functions.. Isn't the buffer created on the stack instead of heap? I don't think it's safe to use it when the the init function finishes..

    opened by pedroke 4
  • Альтернативы электронным компонентам

    Альтернативы электронным компонентам

    Is it possible to replace it with bmp280.

    https://aliexpress.ru/item/33000261871.html?sku_id=67065052190&spm=a2g2w.productlist.0.0.17895baerVcNhx or https://aliexpress.ru/item/1005001621733499.html?sku_id=12000016846125862&spm=a2g2w.productlist.0.0.17895baerVcNhx

    As far as I know, it contains temperature and humidity sensors and pressure sensors. The accuracy may be reduced,

    but it is cheaper. Can it be supported?

    opened by Tao173 1
Releases(v0.0.23)
Owner
Sergey Koptyakov
https://t.me/koptserg
Sergey Koptyakov
Baseline Arduino shield for temperature, humidity, soil moisture and ambient light

Introduction Green-Shield is an Arduino R3 shield for temperature, humidity, soil moisture and ambient light optimized for use in greenhouses where th

#Eduh 3 Dec 29, 2021
My new zigbee project. Wireless temperature and humidity mini sensor with electronic ink display 2.13 inches, low power consumption, compact size, enclosure with magnets.

My new zigbee project. Wireless temperature and humidity mini sensor with electronic ink display 2.13 inches, low power consumption, compact size, enclosure with magnets. The device use SHTC3 sensors, chip CC2530, battery CR2477.

Andrew Lamchenko 20 Nov 20, 2022
Updated Vindriktning with Wifi Connectivity, Motion sensor, Temperature and Humidity

Vindriktning-plus Updated Vindriktning with Wifi Connectivity, Motion sensor, Temperature and Humidity Inspired & parts of the code are used from: htt

Glittering Dealer 4 Sep 20, 2022
This is an Arduino library for Aosong ASAIR AHT1x, AHT2x Digital Humidity & Temperature Sensor

Aosong ASAIR AHT1x/AHT2x This is an Arduino library for Aosong ASAIR AHT10/AHT15/AHT20/AHT21/AHT25/AM2301B/AM2311B Digital Humidity & Temperature Sens

enjoyneering 44 Nov 15, 2022
Harsh Badwaik 1 Dec 19, 2021
A motion-activated LED light strip controller. Supports up to two motion detectors.

A simple standalone motion activated controller for WS2812b LED lights Version 0.30 adds the ability to change settings from a web interface without r

null 4 Mar 12, 2022
Custom Arduino-based temperature and humidity data logger.

Arduino Datalogger A custom data logger based on ATmega32u4 with a custom PCB. The device features the following main components: Atmel ATmega32u4 MCU

Valentin Bersier 7 Jul 19, 2021
Arduino library for the SHT2x series temperature and humidity sensors including SHT20, 21, 25.

SHT2x Arduino library for the SHT2x and HTU2x temperature and humidity sensors. Description The SHT2x family of sensors should work up to 400 KHz I2C.

Rob Tillaart 9 Nov 8, 2022
Code accompanying our SIGGRAPH 2021 Technical Communications paper "Transition Motion Tensor: A Data-Driven Approach for Versatile and Controllable Agents in Physically Simulated Environments"

SIGGRAPH ASIA 2021 Technical Communications Transition Motion Tensor: A Data-Driven Framework for Versatile and Controllable Agents in Physically Simu

null 10 Apr 21, 2022
Decoding light morse code with a light dependent resistor and Arduino board

Morse decoder The project's idea is very simple, the Arduino program has the responsibility to upload the sensor's data to the USB serial port.

null 15 Mar 12, 2022