Install the Homebrew Channel to the vWii Menu from Wii U Mode.

Overview

Compat Title Installer

Install a channel to the vWii Menu from Wii U Mode. In its current state, it simply installs the Homebrew Channel.

Building

You need devkitPPC and devkitARM installed, and the environment variables set correctly. You will need the following libraries:

If everything is installed, run 'make' and the output will be available as 'compat-installer.elf' in the source folder.

Credits

  • Dimok, smealum, others for iosuhax and Mocha CFW.
  • FIX94, this repo is largely based off of wuphax.

License

This software is licensed under the GNU General Public License version 2 (or any later version). The full license can be found in the LICENSE file.

The Homebrew Channel is licensed under GPLv2 and is included in binary form. A copy of the source code is available at fail0verflow/hbc.

You might also like...
A homebrew browser that's actually good.

Better Homebrew Browser The homebrew browser that's actually good. Massive thanks to GrapheneCt on his work on ScePaf. Features It is the second ever

Libnaomi - Toolchain and system library enabling hobby/homebrew software to be developed for the Sega Naomi platform.

Naomi Toolchain & Libraries A minimal Naomi homebrew environment, very loosely based off of KallistiOS toolchain work but bare metal and implemented f

A complete Javascript environment for creating homebrew applications and games on PlayStation 2.
A complete Javascript environment for creating homebrew applications and games on PlayStation 2.

AthenaEnv is a project that seeks to facilitate and at the same time brings a complete kit for users to create homebrew software for PlayStation 2 using the JavaScript language.

Documenting and preserving the N64, combining official datasheets and homebrew research together

N64-documentation A repository where I try to document everything about the Nintendo 64 to the best of my ability. All the official and homebrew Ninte

16 channel R/C system for models of all kinds

A 16 channel Radio Controlled system for R/C models of all kinds. This project was started during the 2020 pandemic lockdown (thus the title), and has since grown out of passion & enthusiasm.

4 channel servo controller code for Arduino Mega 2560 for AASD-15A and similar motor driver

eh-msc-4dof 4 channel servo controller code for Arduino Mega 2560 for AASD-15A and similar motor driver Arduino sketch for generating pulses needed to

A basic, MQTT integration point service for the Waveshare 8 channel relay board

relayboard-control A basic, MQTT integration point service for the Waveshare 8 channel relay board. This was built specifically for our own home's rel

CredBandit - Proof of concept Beacon Object File (BOF) that uses static x64 syscalls to perform a complete in memory dump of a process and send that back through your already existing Beacon communication channel

CredBandit CredBandit is a proof of concept Beacon Object File (BOF) that uses static x64 syscalls to perform a complete in memory dump of a process a

 HAGIWO 6 Channel Sequencer / Euclidean Rhythm Sequencer
HAGIWO 6 Channel Sequencer / Euclidean Rhythm Sequencer

A through-hole PCB conversion of HAGIWO's 6 channel eurorack gate sequencer. Includes Gerbers, Code and building instructions.

Comments
  • Install Original HBC instead of OHBC

    Install Original HBC instead of OHBC

    Hi,

    I think you should mention that this tool installs a very specific version of the homebrew channel.

    Is it possible to choose a version to install?

    opened by toxic9 1
  • Make sure the ticket folder exists

    Make sure the ticket folder exists

    This causes issues on completely clean vWii's which never installed any titles. These vWii's are missing the 00010001 folder in ticket which results in the following error: err

    opened by GaryOderNichts 0
  • Error code 200002

    Error code 200002

    Hey i've tried to install the Homebrew Launcher for the vWii with this, but every time when i press the A button to start the ijnstallation process i get the error code 200002.

    opened by xUnleqitTV 1
  • Coldboot Haxchi's Autoboot feature does not recognize OHBC title installed by Compat Installer

    Coldboot Haxchi's Autoboot feature does not recognize OHBC title installed by Compat Installer

    I know that this is very likely not an issue that you can fix, with you not being a dev for CBHC, but do you think you could add an option to install the LULZ title instead of OHBC?

    I'm really not too sure if this is fixable by some config file edit, but Coldboot Haxchi, when interrupted in the Autoboot menu and Boot to vWii Homebrew Channel is selected, does not boot the Homebrew Channel (cycles to vWii logo and back to Autoboot menu) This is not changed by changing a file like hbl2hbc.txt to the correct title ID from LULZ (although I had to do that as well). I understand that OHBC has some minor improvements, so I'm not too sure why CBHC defaults(?) to LULZ as the HBC TID.

    At any rate, if I install with Wuphax, this issue is not encountered.

    opened by lisiyaki 1
Releases(v1.1)
Owner
Puzzle
Puzzle
Generate and Install NDS Forwarders

NDSForwarder This app will create nds forwarders and install them to the home screen of the 3ds. The forwarders created with this app work in conjunct

MechanicalDragon 81 Jan 3, 2023
Source code for the Mario Kart Wii Tournament Museum mod

Mario Kart Wii Tournament Museum Source code for the MKWTM mod. Includes the rel source and the loader. Building To compile code you'll need: NXP 'Cod

Puzzle 12 Nov 29, 2022
Utility to install kexts, Frameworks and PrivateFrameworks in the System of macOS. For macOS Monterey 12 and Big Sur 11

Command-Line-SnapShot-Mounter Credit: chris1111 Apple This utility uses the macOS terminal Command Line SnapShot Mounter is an utility that allows you

chris1111 23 Jan 8, 2023
Shows different icons for 64 and 32-bit DLLs. Register with RegSvr32 to install

DllIconHandler This project demonstrates how to create a Shell Icon Handler, that is loaded by Explorer.exe. An icon handler can show different icons

Pavel Yosifovich 27 Dec 11, 2022
Updates the Wii's current system time with the real world time.

Fix Wii System Time This is a homebrew tool I made for the Wii a while ago. It updates the current system time with the real world time via worldtimea

Puzzle 2 Nov 9, 2022
🎁 An easy way to install DWM + Dots

DWM - DOTS ━━━━━━ ❖ ━━━━━━ Window Manager ‱ DWM ?? Tiles Everywhere! Shell ‱ Zsh ?? con oh-my-zsh framework! Terminal ‱ Kitty ?? Una terminal que sopo

linuxmobile ( ăƒȘナックă‚č ) 40 Dec 17, 2022
A simple 3D game engine for GameCube, Wii, 3DS, Windows, and Linux.

octave A Simple 3D Game Engine for GameCube, Wii, 3DS, Windows, and Linux Windows Setup Download and Install: Visual Studio Community 2017 (with C++ s

Martin Holtkamp 10 Dec 25, 2022
If the button pressed esp will reset and App mode will on. App mode will on then led will on, network is connected led will off.

DHT22-to-Google-sheet-Reset-Using-ESP8266-LED-Switch If button pressed esp will reset and App mode will on. App mode will on then led will on, network

Md. Harun-Or-Rashid 3 Aug 17, 2022
A different way of calling the notify function on the ps4 for homebrew development.

PS4-Notify A different way of calling the notify function on the ps4 for homebrew development. Calling the new Notify void Notify(char* IconURI, char*

Greg 24 Dec 20, 2022
A Nintendo Switch homebrew for importing and exporting Miis.

MiiPort A Nintendo Switch homebrew for importing and exporting Miis. Installation Download a release and then place the .nro file at sd:/switch/MiiPor

null 22 Aug 23, 2022