ORBION the OpenSource Space Mouse 3D

You might also like...
ESP32 software USB host through general IO pins. We can connect up to 4 USB-LS HID (keyboard mouse joystick) devices simultaneously.

esp32_usb_soft_host esp32 USB-LS pure software host thru general IO pins. Up to 4 HID devices simultaneously. board ~$3 :https://www.aliexpress.com/pr

Control your mouse using razer synapse

rzctl Control your mouse using razer synapse Compile in x64 Not tested for x86 Credits Process Hacker - https://github.com/processhacker/processhacker

Simple tool to visualize and amplify mouse movements
Simple tool to visualize and amplify mouse movements

mousemic Simple tool to visualize and amplify mouse movements. This utility uses a high-level X11 Api so is not really more sensitive than your screen

A Simple tool to execute shellcode with the ability to detect mouse movement
A Simple tool to execute shellcode with the ability to detect mouse movement

Noobi A Simple tool to execute shellcode with the ability to detect mouse movement Features: Sandbox evasion through detecting mouse movement and chec

ESP8266 software USB host through general IO pins. We can connect up to 2 USB-LS HID (keyboard mouse joystick) devices simultaneously.
ESP8266 software USB host through general IO pins. We can connect up to 2 USB-LS HID (keyboard mouse joystick) devices simultaneously.

esp8266_usb_soft_host Test for esp8266 usb host . Works with ESP-IDF v3.4 80MHz and 160MHz. WorkInProgress Test run with mouse & combined mouse & keyb

Arduino code to interface with quadrature-encoder mice, specifically the Depraz mouse

Depraz Mice on USB via Arduino This code lets you connect a Depraz mouse to a modern computer via USB. The Depraz mouse has a male DE-9 connector but

Eliminate double clicks due to failing mouse switches.

Double Click Monitor Eliminate double clicks due to failing mouse switches. Binaries Pre-compiled binaries have been uploaded here. Compiling This sol

A simple tool using PC mouse via USART to control MCU and LCD/OLED (with LVGL library), if your screen cannot be controlled by touch.
A simple tool using PC mouse via USART to control MCU and LCD/OLED (with LVGL library), if your screen cannot be controlled by touch.

LVGL_USB_Mouse A simple tool using PC mouse via USART to control MCU and LCD/OLED (with LVGL library), if your screen cannot be controlled by touch. 如

A cheap,simple,Ongeki controller Use Keyboard Simulation and Mouse Simulation to controller the ongeki game. Using Pro-micro control.
A cheap,simple,Ongeki controller Use Keyboard Simulation and Mouse Simulation to controller the ongeki game. Using Pro-micro control.

N.A.G.E.K.I. A cheap,simple,Ongeki controller Use Keyboard Simulation and Mouse Simulation to controller the ongeki game. Using Pro-micro control. 中文版

Releases(Hardware_2.5)
  • Hardware_2.5(Mar 21, 2022)

    New add

    • Other 2 rear button
    • Insert for reset button
    • Timeout display and Neopixels (Default set 1min)
    • Two version for right-handed & left-handed (Top_Left or Top_Right file)
    • New support for USB type interchangeable
    • Different method for inserting the OLED display
    • Axial bearing in the knob to avoid strange oscillations
    • Clip to secure cables in place
    • multiple cable routes for the Arduino support
    • new knob hooking system to prevent deformed prints

    Fixed

    • wobbly knob rotation
    • display attachment system not always compatible and unstable

    All the parts can be printed in the material of your choice except the Wire_clips and cuschion which must be exclusively in TPU Shore 95A or 85A.

    The Spacers must also be printed, they will be positioned as the last component after inserting the knob_support on the D-shaft. Any rigid material is fine

    The Top_Left and Top_Right versions are to be printed based on whether you are right-handed or left-handed.

    Source code(tar.gz)
    Source code(zip)
    CAD.zip(20.55 MB)
    STL.zip(17.68 MB)
  • Firmware_0.26.5(Apr 5, 2022)

    New add

    • Add Brightness settings
    • Loop menu
    • Timeout display and Neopixels (Default set 1min)

    Fixed

    • Button bounce
    • Inhomogeneous joystick axes
    • Smoother menu
    • Accidental scrolls during knob movement (encoder disabled during movements)

    On the main page you will find the HowToFlashing.pdf file with a small step by step guide to load and flash the new firmware with PlatformIO

    Source code(tar.gz)
    Source code(zip)
    Orbion_FW_v0.26.5.zip(2.92 MB)
  • Firmware_0.26.4(Mar 19, 2022)

    From this version it will no longer be necessary to use Arduino IDE

    which will be replaced by Visual Studio Code with the PlatformIO plugin

    On the main page you will find the HowToFlashing.pdf file with a small step by step guide to load and flash the new firmware with PlatformIO

    New add

    • Add other 2 Buttons settings
    • Neopixels item menù
    • Timeout display and Neopixels (Default set 1min)

    Fixed

    • non-smooth rotation
    • menu that froze
    • SRAM memory full
    • Serial busy (due to uncontrolled cycles)
    • unused libraries

    We also inform you that: the firmware uses a different wiring diagram as well as additional components such as the Neopixel, so it is recommended to use the firmware with the HARDWARE 2.5 version

    For all those who have already run the project previously, they must use the "OLD" firmware versions. In case you want to use the new implementations such as the neopixels, you need to make some changes to the knob and add 1 cable for controlling the LEDs as well as correctly setting the pins of your project. for help ask about Discord

    Source code(tar.gz)
    Source code(zip)
    Orbion_FW_v0.26.4.zip(2.57 MB)
Owner
FaqTotum
FaqTotum
Allwinner V3S Opensource

KS_V3S • Bilibili Video Introduction:https://www.bilibili.com/video/BV17z4y1S7D6 I have designed this PCB, because the sheer power of this SoC, at ver

Kevincoooool 195 Dec 29, 2022
SMARTmBOT - a new, customizable, scalable, and fully opensource mobile robot platform

The goal of this repository is to introduce a new, customizable, scalable, and fully opensource mobile robot platform, called SMARTmBOT. This repository provides a guide, and all design files and source codes so that you can build your own SMARTmBOT. SMARTmBOT can be useful for studying the basics of robotics, especially mobile robotics. It can also be used to study advanced topics such as swarm robotics.

SMART Lab at Purdue University 39 Jan 2, 2023
RV-Debugger-BL702 is an opensource project that implement a JTAG+UART debugger with BL702C-A0.

BL702 is highly integrated BLE and Zigbee combo chipset for IoT applications, contains 32-bit RISC-V CPU with FPU, frequency up to 144MHz, with 132KB RAM and 192 KB ROM, 1Kb eFuse, 512KB embedded Flash, USB2.0 FS device interface, and many other features.

Sipeed 100 Jan 1, 2023
sipeed opensource mechanical keyboard make with BL706

sipeed_keyboard sipeed opensource mechanical keyboard make with BL706 矽π 开源双模机械键盘 目录结构 ./ ├── LICENSE ├── README.md ├── firmware // 存放键盘固件 ├── hardwar

Sipeed 58 Dec 23, 2022
RoboMaster2021 Infantry Vision OpenSource Code of Foshan University

佛山科学技术学院醒狮战队2021赛季步兵视觉开源 致谢 首先感谢各高校开源代码为本套代码提供的参考,以及感谢2018、2019、2020赛季算法组师兄们的努力。秉承着开源精神,促进各战队间技术交流提升,我队决定本赛季开源本套代码,希望对其他战队提供一定的参考价值。 说明 本套代码是佛山科学技术学院醒

null 28 Aug 30, 2022
A repository to contribute and learn OpenSource

HacktoberFest 2021 ?? An opensource intiative organised by DigitalOcean and Intel SO this is an An Open Source repository to Teach people How to contr

BreadBoard Coding Society 19 Nov 13, 2022
free template opensource with minimal depends library flutter & dart

Project Name Sosial Media Donate ID: Jika Anda Menyukai karya saya dan ingin memberikan dana untuk saya membeli beberapa snack silahkan donasi seberap

Azka Full Snack Developer:) 34 Dec 23, 2022
This is the official source code of FreeCAD, a free and opensource multiplatform 3D parametric modeler

This is the official source code of FreeCAD, a free and opensource multiplatform 3D parametric modeler

FreeCAD 12.9k Dec 31, 2022
PyAerotech: An Opensource Python Library or interfacing directly with the Aerotech A3200 Controlle

PyAerotech: An Opensource Python Library or interfacing directly with the Aerotech A3200 Controller pyAerotech is an additional Opensource Python libr

Dr Luke Parry 3 Aug 22, 2022
This is the second genereation of my fully opensource Spacemouse called SpaceRat

SpaceRat This is the second genereation of my fully opensource Spacemouse called SpaceRat. With the help of this you can navigate in your 3D CAD softw

null 255 Jan 1, 2023